Having a strong and reliable wi-fi connection is a must for a smooth online experience. But sometimes, your router’s wi-fi doesn’t cover every corner of your house, causing slow and dead zones. That’s where Linksys re7000 comes into play. In this blog post, we will show you how to set up Linksys re7000 for faster wifi and say no to annoying dead zones.
Take a look!
Ways to Improve the Speed of Wi-fi
- Use Wi-fi Extenders
Have you ever noticed slow wifi signals even though you have placed your router perfectly? In large multistory buildings, dead zone occurs frequently. At that time we need wi-fi extenders.
How do wifi extenders work? They receive wi-fi signals from your router, boost them, and expand your wi-fi coverage. Linksys extenders are also good to go. They are very popular nowadays.
- Avoid Electronic Interference
Speeding up your wi-fi by moving away from electronic devices like microwaves, Bluetooth devices, and so on. Less interference of these devices leads to better speed.
- Router Placement
Finding the right spot for your router is important. Walls, floors, and furniture can impact wi-fi speed. It’s better to place your router close to the center of your house like in open areas away from electronic devices. Don’t place your router on the floor as it spreads wifi signals downwards.
- Antenna Position
If your router has adjustable antennas, optimize their position. Place your antennas one vertically and the other horizontally. For routers with a single external antenna, you can try various positions to find the optimal setup. Adjusting antennas can significantly enhance signal strength and network stability.
- Protection
Securing your wi-fi with a password is important for protecting against hackers and preventing unauthorized usage by neighbors. Choose WPA2 as the encryption method.
- Regular Router and Modem Reboots
Reboot your router and modem regularly. Over time, continuous operation can lead to issues like slow wi-fi speed, page loading problems, video freezing, and music interruptions. A simple reboot refreshes the router’s memory and facilitates updates.
Have you tried these tips? Let us know in the comments which one worked for you in enhancing your wi-fi speed.
Linksys Re7000 Setup Process
Enhance your wifi speed with Linksys Re7000. Take a look at the steps below on how to setup Linksys Re7000:
Many ISPs provide basic single-band wireless routers, which is not possible to meet the demands for increased speed and broader coverage. If you are facing these issues just simply install Linksys re7000 wi-fi extenders. These extenders remove speed limitations imposed by ISP routers and significantly expand your wireless network coverage.
Solving speed and coverage issues without replacing the ISP’s provided wifi router is simple with a pair of Linksys re7000 wifi extenders. Use one extender as a wi-fi access point and the other as a wi-fi range extender for seamless improvement in your network.
- Use an Ethernet cable to connect the first Linksys RE7000 to an available port on the ISP router.
- So, firstly set up the first Linksys re7000 as an Access Point.
- Now set up the second Linksys re7000 as a range extender
Setup Instructions:
First Linksys re7000 Set up
- Plug your range extender into a power outlet and wait patiently until the indicator light starts blinking orange.
- Connect an ethernet cable from your router to the range extender. Wait for the light to turn green based on your extender’s model.
- Connect a wi-fi enabled device to the range extender’s default SSID.
- Enter the official website of Linksys in the browser’s address bar. If it doesn’t load, find your extender’s IP address on your router.
- Click Start Up then choose Access Point. Click next.(Connect the ethernet cable before proceeding)
- Create unique wifi names for the extender on both 2.4GHz and 5GHz bands. Set a wifi password and click next. Create a wi-fi password and click save.
- Your range extender is in Access point mode now. The header will read dual-band wireless access point.
Second Linksys re7000 Setup
- Plug your Linksys re7000 into a power outlet
- Connect to the Linksys re7000 default wifi using your device. Ensure that you are connected to this wifi for the setup
- Use the official website to open the setup page
- Click Start Setup and create an admin password along with a password hint. Click save when done
- Choose “as a wireless range extender” and click next
- The spot finder page appears only in Range extender mode. This features the signal strength between your router and range extender. Keep these devices closer
- Update your device’s firmware as it automatically checks it
- Second Linksys re7000 is now set up
- When the Linksys re7000 is in range extender mode, the header will read dual-band range extender.
It’s a Wrap!
Linksys re7000 wifi effectively transforms your home network by eliminating dead zones and enhancing wifi speed. By following the Linksys re7000 proper setup process and optimizing its performance, you can enjoy a faster and more reliable internet connection throughout your space. If you still face issues, you can ask your queries in the comments. Our tech support team will guide you.
